Speed Dial Numbers; One Touch; Speed Dial- Page 77

67

S E T U P   Q U I C K - D I A L   N U M B E R S

8

The screen prompts you to select the type of number this is. Use 
or   to select the type you want.

FAX

a fax number

TEL

a telephone (voice) number

F/T

both a fax and telephone number

9

Press 

Set

.

10

Return to Step 2 to store another Speed Dial number. ––OR–– Press

Stop

 to exit.

Changing One Touch and
Speed Dial Numbers

If you try to store a One Touch or Speed Dial number in a location where
a number is already stored, the screen displays the current name stored
there, then prompts you to either change it or exit.

1.CHANGE 2.QUIT

1

Press 

1

 to change the number stored, or press 

2

 to exit without

making a change.

2

Enter a new number.

■

If you want to erase the number, press 

Stop

 when the cursor is

to the far left of the digits. The letters above and to the right of
the cursor will be deleted.

■

If you want to change a digit, use   or   to position the cursor
under the digit you want to change, then enter it.

3

Follow the directions in Storing One Touch Dial or Speed Dial
Numbers.

Setting Up Groups for Broadcasting

Groups allow you to send the same fax message to many fax numbers by
pressing only one One Touch key. (This is called Broadcasting.) First,
you’ll need to store each fax number as a One Touch or Speed Dial
number. Then, you can combine them into a Group. Each Group uses up
a One Touch key.  Finally, you can have up to 6 small Groups, or you can
assign up to 45 (FAX-8060P) or 37 (MFC-9060) numbers to one large
Group.

You can include up to 15 (FAX-8060P) or 7 (MFC-9060) One Touch
locations, or up to 30 Speed Dial locations. If you broadcast to more than
the maximum locations available, you will be unable to set up
transmissions using Dual Access and the Timer.

See

“Storing

One Touch

Dial

Numbers”

 and

“Storing

Speed Dial

Numbers”

in this

chapter