For a longer service life:; For repair or adjustment:; Use this machine only for its intended - Page 3

Brother 855-X06 User Manual

2014 Dodge Charger SRT Owner Manual
background image

2

• Keep fingers away from 

all

 moving 

parts. Special care is required around 

the machine needle.

• Switch the machine to the symbol 

“O” position to turn it off when 

making any adjustments in the needle 

area.

Do not

 use a damaged or incorrect 

needle plate, as it could cause the 

needle to break.

Do not

 push or pull the fabric when 

sewing, and follow careful instruction 

when freehand stitching so that you 

do not deflect the needle and cause it 

to break.

6

This machine is 

not

 a toy:

• Your close attention is necessary 

when the machine is used by or near 

children.

• The plastic bag that this machine was 

supplied in should be kept out of the 

reach of children or disposed of. 

Never allow children to play with the 

bag due to the danger of suffocation.

Do not

 use outdoors.

7

For a longer service life:

• When storing this machine, avoid 

direct sunlight and high humidity 

locations. Do not use or store the 

machine near a space heater, iron, 

halogen lamp, or other hot objects.

• Use only neutral soaps or detergents 

to clean the case. Benzene, thinner, 

and scouring powders can damage 

the case and machine, and should 

never be used.

• Always consult the operation manual 

when replacing or installing any 

assemblies, the presser feet, needle, 

or other parts to assure correct 

installation.

8

For repair or adjustment:

• If the Light unit (light-emitting diode) 

is damaged, it must be replaced by 

authorized dealer.

• In the event a malfunction occurs or 

adjustment is required, first follow the 

troubleshooting table in the back of 

the operation manual to inspect and 

adjust the machine yourself. If the 

problem persists, please consult your 

local authorized Brother dealer.

Use this machine only for its intended 

use as described in this manual.
Use accessories recommended by the 

manufacturer as contained in this 

manual.
The contents of this manual and 

specifications of this product are 

subject to change without notice.
For additional product information, 

visit our web site at www.brother.com

SAVE THESE 

INSTRUCTIONS

This machine is intended 

for household use.

This appliance is not intended for use by 

persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience and 

knowledge, unless they have been given 

supervision or instruction concerning use 

of the appliance by a person responsible 

for their safety.

Children should be supervised to ensure 

that they do not play with the appliance.

FOR USERS IN THE UK, EIRE, 

MALTA AND CYPRUS ONLY

IMPORTANT

• In the event of replacing the plug fuse, use a fuse 

approved by ASTA to BS 1362, i.e. carrying the 

 

mark, rating as marked on plug.

• Always replace the fuse cover. Never use plugs with 

the fuse cover omitted.

• If the available electrical outlet is not suitable for the 

plug supplied with this equipment, you should 
contact your authorized dealer to obtain the correct 
lead.

Detailed Information for Brother 855-X06 User Manual

Lists of information found in Brother 855-X06 User Manual - Page 3

  • Keep fingers away from all moving parts.
  • Switch the machine to the symbol “O” position to turn it off when making any adjustments in the needle area.
  • Do not use a damaged or incorrect needle plate, as it could cause the needle to break.
  • Do not push or pull the fabric when sewing, and follow careful instruction when freehand stitching so that you do not deflect the needle and cause it to break.
  • Your close attention is necessary when the machine is used by or near children.
  • The plastic bag that this machine was supplied in should be kept out of the reach of children or disposed of.
  • Do not use outdoors.
  • When storing this machine, avoid direct sunlight and high humidity locations.
  • Use only neutral soaps or detergents to clean the case.
  • Always consult the operation manual when replacing or installing any assemblies, the presser feet, needle, or other parts to assure correct installation.
  • If the Light unit (light-emitting diode) is damaged, it must be replaced by authorized dealer.
  • In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself.
  • In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.
  • Always replace the fuse cover.
  • If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact your authorized dealer to obtain the correct lead.

Related Documents for Brother 855-X06 User Manual