2-6 Lubrication to Needle Bar Case- Page 34

2-6

BE-0901E-AC-PC• BE-1201B-AC-PC

Chapter 2 Preparation of Embroidery Machine

2-6 Lubrication to Needle Bar Case

CAUTION

Turn off the power switch before starting any cleaning work, otherwise the machine may operate if the

start switch is pressed by mistake, which could result in injury.

Proper lubrication is necessary for keeping the machine head in good condition.

BE-0901E-AC-PC

W1570

BE-1201B-AC-PC

W1570

Before operating the machine for the first time

after unpacking or after leaving the machine

without operation for a long period of time,

supply one or two drops of oil to two sections at

the top and the bottom of each needle bar. (See

the left figure.)

Note)• Use the Brother's specified embroidery

machine oil (Nisseki Embroidery Lube No.
10 or the equivalent).

• Supplying an excessive amount of oil

will cause dripping onto the material.