3 Connecting the power cord; Improper Setup; Setting Up the Machine- Page 7

Setting Up the Machine

5

Note

When you use Legal size paper, press and hold 
the universal guide release button as you slide out 
the front of the paper tray.

5

Gently adjust the paper side guides with both 
hands and the paper length guide to fit the 
paper.
Make sure that the paper side guides and 
paper length guide touch the edges of the 
paper.

Note

Be careful that you do not push the paper in too 
far; it may lift at the back of the tray and cause 
paper feed problems.

6

Close the output paper tray cover.

7

Slowly push the paper tray completely into the 
machine.

8

While holding the paper tray in place, pull out 
the paper support ( ) until it clicks, and then 
unfold the paper support flap ( ).

Note

Do not use the paper support flap for Legal paper.

 3

Connecting the power cord

1

Connect the power cord.

Improper Setup

DO NOT connect the USB cable. Connecting 
the USB cable is done during the software 
installation process.

Note

The control panel warning LED will stay on until 
you have installed the ink cartridges.