Improper Setup; Setting Up the Machine; a keyboard or a non-powered USB hub. - Page 19

Setting Up the Machine

17

2 Insert the USB cable into the USB socket marked 

with a 

 symbol. You will find the USB socket 

inside the machine as shown below.

3 Carefully route the USB cable through the trench 

and out the back of the machine as shown below 
and connect the cable to your computer.

Improper Setup

• DO NOT connect the machine to a USB port on 

a keyboard or a non-powered USB hub. 
Brother recommends that you connect the 
machine directly to your computer.

• Make sure that the cable does not restrict the 

cover from closing, or an error may occur.

• Please make sure you use a USB 2.0 cable that 

is no langer than 6 feet (2 meters) long.

4 Lift the scanner cover to release the lock (

).

Gently push the scanner cover support down            
(

) and close the scanner cover (

).