Quick Network Setup Guide; Step 5; Step 6- Page 2

Reprint

Data

Go

Job cancel

Back

Set

OFF  ON

O     I

OFF  ON

O     I

OFF  ON

O     I

OFF  ON

O     I

Follow the instructions for your interface cable and operating system.

5

Turn the printer power 
switch on.

3

Turn the printer power switch off. 

4

Connect the interface cable to your PC,  and 
then connect it to the printer.

6

Click the Next button.

7

Click the Finish button.  
The setup is now complete.

For

 Parallel 

interface cable users (For

Windows

®

users only)

3

Connect the USB interface cable to your Macintosh

®

, and 

then connect it to the printer. 

2

Make sure the printer power switch 
is on.

1

Double-click the Printer Driver Installer icon, and 
then follow the instructions on the screen.

4

Open the Chooser from the Apple

®

 menu on the 

Macintosh

®

.

If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide.  
After the administrator has made the required settings, install the driver referring to the "Installing the 
Driver for Network users" section of the Quick Network Setup Guide.
For HL-1650 user: Install the optional Network board (NC-4100h) referring to Chapter 4 of the 
printer.

Step 5   Install the Driver & Connect the Printer to your Macintosh

®

Step 5   Install the driver & Connect the printer to your PC

Step 6   Setting your PC printer port 

(For Windows

®

 2000 users only)

Step 5   Connect the printer to your PC & Install the printer driver 

5

Click the HL-1650/1670N icon and select it.
The setup is now complete.

For 

USB

 interface cable users (For 

Macintosh

®

 users only)

For 

Network

 users

Control Panel

Data LED : Orange

Switches

Language Setting (Default setting is English)

4

Click the OK button. 

Note: When the "Add New Hardware 
Wizard" appears on your PC, click the 
Cancel button.

Note: Start installing the driver before 
you connect the USB interface cable to 
the printer. If you have already 
connected it, remove it.

Note: If "Add New Hardware Wizard" 
appears, click the Cancel button.

1

After your PC has restarted, click Start, 
Setting and Printers.  

2

Select the Brother HL-1650/1670N 
series (copy2) icon.

3

Click on the File menu, and then 
select Set as Default printer. 
The setup is now complete.

5

Make sure the printer power switch is 
on.

6

Connect the USB interface cable to your PC, and then 
connect it to the printer. 

For Windows

®

 98/Me users: The setup is now complete.

For Windows

®

 2000 users: Go to Step 6.

For 

USB

 interface cable users (For 

Windows

®

 users only)

On

Blinking

Off

For more information, see Chapter 
3 "CONTROL PANEL" in the User's 
Guide. 

Data remains in the printer buffer. 

Receiving or processing data.

No remaining data.

Exit from the control panel menu, reprint settings and clear error messages.
Pause / Continue printing.

Stop and cancel the printer operation in progress.

Select the reprint menu.

Move forward and backward through menus.

Move forward and backward through selectable options.

Select the control panel menu.
Set the selected menus and the settings.

Go back one level in the menu structure.

1. Select the SETUP mode by pressing the 

+

 switch, and press the Set switch.

2. Check that the LANGUAGE message appears, and press the Set switch.
3. Choose your language by pressing the 

+

 or 

-

 switch, and press the Set switch. An asterisk mark (

*

) 

appears at the end of the display. 

(You can return to the READY status by pressing the Go switch.)

Set

Back

Go

Job Cancel

Reprint

Menu

1

Click "Connect the interface 
cable and install the printer 
driver / utilities".

2

Select the USB cable.

3

Click the Next button.

1

Click "Connect the interface cable and 
install the printer driver / utilities".

2

Select the parallel interface 
cable.