Print a Test Page; Setting Up Your Printer; Step 1- Page 12

10

Setting Up Your Printer

Do NOT connect the interface cable.
You will be prompted to connect the 
interface cable during the driver 
installation. 

1

Make sure that the printer power switch is 
off. 
Connect the AC power cord to the printer. 

2

Plug the AC power cord into an AC outlet.
Turn the power switch on.

3

After the printer has finished warming up, 
the 

Ready

 LED stops blinking and stays 

green.

4

Press the 

Go

 button. The printer prints a 

test page.
Check that the test page has printed 
correctly.

4

Print a Test Page

Unfold the Support flap.

This function won’t be available after 
the first print job you send from your 
PC.

Go to the next page 
to install the driver.

Step 1