Box Drawing; Line Block Drawing; Expanded Character Data Start- Page 241

Appendix–42

•

When ISBN (EAN) is selected with the parameter “t130” or “T130”:

Same rules apply as for “t5” or “T5”

•

When ISBN (UPC-E) is selected with the parameter “t131” or “T131”:

Same rules apply as for “t6” or “T6”

•

When EAN 128 set A, set B or set C is selected with the parameter
“t132” or “T132”, “t133” or “T133” or “t134” or “T134” respectively:

Same rules apply as for “t12” or “T12”, “t13” or “T13”, or “t14” or “T14."

♦

Box Drawing

ESC i … E (or e)

“E” or “e” is a terminator.

♦

Line Block Drawing

ESC i … V (or v)

“V” or “v” is a terminator.

♦

Expanded Character Data Start

n = “l” or “L”

Data that follows “l” or “L” is read as expanded character data (or labeling
data). Expanded character data must end with the “ \ ” code (5CH), which
also terminates this command.

[Example Program Listings]

WIDTH "LPT1:",255

      'CODE 39
      LPRINT CHR$(27);"it0r1s0o0x00y00bCODE39?\";

      'Interleaved 2 of 5
      LPRINT CHR$(27);"it1r1s0o0x00y20b123456?\";

      'FIM
      LPRINT CHR$(27);"it3r1o0x00y40bA\";