1 - 4 UNIX PRINTING- Page 15

1 - 4 UNIX PRINTING

YL4US_FAX2800MFC4800-FM5.5

3

Configure the 

/etc/printcap

 file on each host computer to 

specify the local print queue, the print server name (also called 
remote machine or rm), and the print server service name (also 
called remote printer, remote queue, or rp), and the spool 
directory.

An example of a typical printcap file:

laser1|Printer on Floor 1:\
:lp=:\
:rm=BRN_310107:\
:rp=TEXT_P1:\
:sd=/usr/spool/lpd/laser1:

This step applies to the majority of UNIX systems, including 
Linux, Sun OS (but not Solaris 2.xx), Silicon Graphics (lpr/lpd 
option required), DEC ULTRIX, DEC OSF/1, and Digital 
UNIX. SCO UNIX users should follow these steps, but should 
also refer to the SCO UNIX Configuration section. Users of 
RS/6000 AIX, HP/UX, Sun Solaris 2.xx, and other systems 
that do not use the printcap file should skip to section 3-a. 
SCO user's should also skip to section 3a (SCO uses the 
printcap file, but this file is automatically configured via the 

rlpconf

 command).

Make sure this information is added to the end of the printcap 
file. Also make sure that the last character in the printcap file 
is a colon ":".

This will create a queue named laser1 on the host computer 
that communicates to a Brother print server with a node 
name (rm) of BRN_310107 and a service name (rp) of 
TEXT_P1 printing text files to a Brother printer through spool 
directory 

/usr/spool/lpd/laser1

. If you are printing 

binary graphics files, you would use the service BINARY_P1 
instead of TEXT_P1.