Disconnect device; Caution for LAN connection (For model HL-5250DN only); IT power system (For Norway only)- Page 7

Safety Precautions

5

Disconnect device

You must install this printer near a power outlet that is 
easily accessible. In case of an emergency, you must 
disconnect the power cord from the power outlet to 
shut off the power completely.

Caution for LAN connection (For model 
HL-5250DN only)

Connect this product to a LAN connection that is not 
subjected to over voltages.

IT power system (For Norway only)

This product is also designed for an IT power system 
with phase-to-phase voltage 230V.

Wiring information (for UK)
Important

If you need to replace the plug fuse, fit a fuse that is 
approved by ASTA to BS1362 with the same rating as 
the original fuse.
Always replace the fuse cover. Never use a plug that 
does not have a cover.

Warning - This printer must be earthed.

The wires in the mains lead are coloured in line with 
the following code:

If in any doubt, call a qualified electrician.

Green and Yellow: Earth

Blue:

Neutral

Brown:

Live