Channnel ; Authentication Method; Encryption Mode- Page 42

Installing the Printer Driver

40

STEP 2

Mac

in

to

s

h

®

W

irel

ess

Network

Macintosh

®

8

If more than one wireless printer is available on 
the network, a list of them will appear. If the list 
is blank, check that the access point and the 
printer are switched on, and then click 

Refresh

.

Choose the printer you wish to configure, and 
click 

Next

.

Note

• The Default Node name of the printers network 

card is "BRN_XXXXXX" (where "XXXXXX" is the 
last six digits of the Ethernet address).

• If you are using Personal Firewall software, 

temporarily disable it. 

9

The wizard will search for wireless networks 
available from your printer. If more than one 
wireless network is available, the following list 
appears. Choose the wireless network you 
wish to associate the printer with, and then 
click 

Next

.

Note

• “SETUP” is the default SSID of the printer. Do not 

choose this SSID.

• If the list is blank, check that the printer is within 

range of the access point for wireless 
communication. Then, click 

Refresh

.

• If your target wireless network does not appear on 

the list, you can manually add it by clicking the 

Add

 button. Follow the on-screen instructions for 

entering the 

Name (SSID)

 and the 

Channnel 

number

.

10

If your network is not configured for 
Authentication and Encryption, the following 
screen will appear. To continue installation, 
click 

OK

. Go to Step 

12

.

11

If your network is configured for Authentication 
and Encryption the following screen will 
appear. When configuring your Brother 
wireless printer, you must ensure that it is 
configured to match the Authentication and 
Encryption settings of your existing wireless 
network. Choose the 

Authentication Method

and 

Encryption Mode

 from the pull-downs in 

each setting box. Then enter the 

Network Key

and click 

Next

.

Note

• If you want to set more than one WEP key, click 

Advanced

.

• If you want to configure LEAP security, see the 

Network User’s Guide.

• If you do not know the Authentication or 

Encryption settings for your network contact your 
network administrator.