Value Width ; Value Stroke ; Weight - Page 90

Brother HL-5350DN Command Reference Guide for Software Developers

Table of Contents

Technical Reference Guide
GLOSSARY
background image

 

CHAPTER 2 PCL - 70 

 

For Intellifont-scalable fonts only,  the default HMI is calculated as follows. 

 

Default HMI (in dots) = (300 x master design pitch x required point size) /  

 

      {Master 

Resolution 

/(height 

8)} 

 

Default HMI ( in dots ) =  

 

(300 x master design pitch x required point size) / {72.307 x scale factor} 

 

Height (UI) - specifies the height of the font in 1/4 dots.  Combined with Height Extended to specify the 

height of the font in 1/1024 dots.  This value can be converted to the point size (1/72"). 
 

For example,  in case of a 10 point font at 300 dpi, 

10 point

72

1

1 inch

300 dots

1 dots

4

= 166.667

 

 

This value is normally set to 2000 for Intellifont and should be set to zero for TrueType fonts. 

 

x-height (UI) - ignored by the HL Series printers. This word specifies the height (for Bitmap fonts) or the 
distance from the baseline (for Scalable fonts) of a lower case 'x' in 1/4 dots. 

 

Width type (SB) - ignored by the HL Series printers. This byte specifies the font character width according 
to the table below. 

 

Value Width 

type 

–5 Ultra 

compressed 

–4 Extra 

compressed 

–3 

Compressed or Extra condensed 

–2 Condensed 

0 Normal 
2

 

Expanded

 

3 Extra 

expanded 

 

Style LSB (UB) - see Style MSB. 

 

Stroke weight (SB) - valid values are from –7 to +7.  0 denotes the normal (Roman) stroke width, –7 is the 
lightest possible stroke and 7 is the boldest. 

 

Value Stroke 

Weight 

–7 Ultra 

thin 

–6 Extra 

thin 

–5 Thin 
–4 Extra 

light 

–3 Light 
–2 Demi 

light 

–1 Semi 

light 

Medium, Book, or Text 

1 Semi 

bold 

2 Demi 

bold 

3 Bold 
4 Extra 

bold 

5 Black 
6 Extra 

black 

7 Ultra 

black 

 

 

Typeface family (UB) – the typeface. This word is made up of the Typeface MSB and the Typeface LSB and 
identifies the typeface by number.  
 Bits 0 to 11 specify the typeface family and bits 12 to 15 specify the vending company. 

 

15                       12 11                                                                      0

Vendor

Typeface Family

 

Detailed Information for Brother HL-5350DN Command Reference Guide for Software Developers

Lists of information found in Brother HL-5350DN Command Reference Guide for Software Developers - Page 90

  • 72.307 x scale factor} Height (UI) - specifies the height of the font in 1/4 dots.
  • 66.667 This value is normally set to 2000 for Intellifont and should be set to zero for TrueType fonts.
  • 7. 0 denotes the normal (Roman) stroke width, –7 is the lightest possible stroke and 7 is the boldest.

Related Documents for Brother HL-5350DN Command Reference Guide for Software Developers