TROUBLESHOOTING 6 - 2
FRONT COVER OPEN
Close the front cover of the printer.
FUSER COVER OPEN
Close the jam clear cover located behind the back output tray at the back of the printer.
IGNORE DATA
Make sure that you use the correct driver, or add more memory. See Installing additional
memory on page 4-12.
JAM XXX
Carefully pull out the jammed paper from the indicated area as shown in Paper jams and
how to clear them on page 6-5.
MANUAL FEED
Put the same size of paper in the multi-purpose tray as is shown on the LCD. If the
printer is 'paused', press Go.
MEDIATYPE ERROR
Specify the correct type of media.
MEMORY FULL
Add more memory. See Installing additional memory on page 4-12.
NO DX TRAY
Put the duplex tray on the printer properly. See page 1-37.
NO PAPER XXX
Put paper in the empty tray.
NO TRAY XXX
Put the paper tray in the printer.
PRINT OVERRUN
Reduce the resolution or add the optional memory. See Installing additional memory on
page 4-12.
Set Page Protection to the correct size. See Device Options on page 2-5 and SETUP
on page 3-16.
SIZE ERROR DX
You can only use A4, Letter and Legal size for duplex printing. Check the printer driver
setting and put the correct sized paper in the paper tray or multi-purpose tray that is
selected in the printer driver. See What kind of paper can I use? on page 1-5.
SIZE ERROR T1/T2
Put the same size paper in the paper tray or multi-purpose tray that is selected in the
printer driver. See What kind of paper can I use? on page 1-5.
SIZE MISMATCH
Put the same size paper in the paper tray or multi-purpose tray that is selected in the
printer driver, and then press Go.
STORAGE FULL
Delete unnecessary macros or fonts, or replace the CompactFlash
TM
card or HDD with
a new one.
TRAY 1 ERROR
Take out the tray 1 from the printer and push it back in firmly.
TRAY 2 ERROR
Take out the tray 2 from the printer and push it back in firmly.
TONER LIFE END
Replace the toner cartridge with a new one.
See Replacing the toner cartridge on page 5-3.
Error messages (Continued)
Error message
Action