Replacing the film cartridge- Page 16

- 14 -

(4)

Install the new film cartridge carefully.

(5)

Return the roller holder to the original position
and press the roller holder lock buttons (purple
color) as illustrated. You will hear the roller
holder click into place. Press the roller holder
further to secure the roller unit.

(6)

Close the top cover.

(7)

Turn the power on. Press the Feed button until
you can see the edge of the film to remove any
slack from the film.

Note
-Make sure that the shutter of the cartridge is

completely closed when installing the
cartridge.

-Check the position of the top edge of the film

before installing cartridge. It should be aligned
with the cutting line of the cartridge. If
necessary, cut away any excess film.

 -Make sure that the film is on the lower roller

and that the top edge of the film is placed
under the side cutter units.

Note
-The condition of the currently installed cartridge can be viewed through the window in the top cover.
-Store the film cartridge at below 113°F (45°C).