Step1 Setting Up the Machine; 1 Removing the Protective Parts; 2 Attaching the Paper Tray and Supports- Page 6

4

Setting Up the Machine

1

Remove the protective tape and paper in 
the ADF.

Do NOT connect the USB cable. 
Connecting the USB cable is done 
when installing the driver.

2

Open the control panel cover by pulling it 
toward you (

1

), and then lift the top cover 

toward the back (

2

).

3

Pull the protective yellow bar out of the 
machine.

4

Close the top cover, and then close the 
control panel cover.

1

Insert the paper tray from above into the 
back of the MFC.

2

Attach the ADF document support.

3

Attach the output paper support to the paper 
output slot, and then pull out the extension.

4

Attach the ADF document output support.

1

Removing the Protective 
Parts

Do not throw away the protective yellow bar.
You will need it in the future to transport the 
machine.

Control Panel Cover

Top Cover

Protective Yellow Bar

2

Attaching the Paper Tray 
and Supports

Paper Tray

ADF Document 
Support

Output Paper Support

Output Paper 
Support Extension

ADF Document 
Output Support

Step 1