Wired Network; Wired Network Connection; Change the - Page 24

24

Windows

®

Wired Network

f

Choose 

Wired Network Connection

, and 

then click 

Next

.

g

For Windows

®

 XP SP2/Windows Vista

®

 users, 

when this screen appears, choose 

Change the 

Firewall port settings to enable network 
connection and continue with the 
installation. (Recommended)

 and click 

Next

.

If you are using a firewall other than Windows

®

Firewall or Windows

®

 Firewall is off, this screen 

may appear.

See the instructions provided with your firewall 
software for information on how to add the 
following network ports.

„

For network scanning, add UDP port 54925.

„

For network PC-Fax receiving, add UDP port 
54926.

„

If you still have trouble with your network 
connection, add UDP port 137.

h

The installation of the Brother drivers will 
automatically start. The installation screens 
appear one after another.

Note

• If the machine is configured for your network, 

choose the machine from the list, and then click 

Next

.

This window will not appear if there is only one 
machine connected on the network, it will be 
chosen automatically.

If your machine shows 

APIPA

 in the 

IP 

Address

 field, click 

Configure IP Address

and enter an IP address for your machine that 
is suitable for your network.

• If the machine is not yet configured for use on 

your network, the following screen appears.

Click 

OK

. 

The 

Configure IP Address

 window will 

appear. Enter an IP address for your machine 
that is suitable for your network by following the 
on-screen instructions.

Important

DO NOT cancel any of the screens during the 
installation. It may take a few seconds for all 
screens to appear.