3 Installing the Phone Line and Power Cord; Step 1; Setting Up the Machine- Page 8

6

Setting Up the Machine

4

Gently insert the paper into the paper tray 
print side down and the leading edge (top of 
the paper) in first.
Check that the paper is flat in the tray and 
below the maximum paper mark.

5

Put the paper tray firmly back into the MFC.

1

Connect the power cord.

2

Connect the telephone line cord.
Connect one end of the telephone line cord 
to the jack on the machine marked 

LINE

and the other end to a modular wall jack.

DO NOT connect the USB cable yet.

Warning

■

The MFC must be connected to a grounded/
earthed plug.

■

Since the MFC is grounded through the power 
outlet, you can protect yourself from potentially 
hazardous electrical conditions on the telephone 
network by keeping the power switched on when 
you connect the MFC to a telephone line. Similarly, 
you can protect yourself when you want to move 
your MFC by disconnecting the telephone line first 
and then the power cord.

Make sure the paper side guides and length 
guide touch the sides of the paper.

Only for MFC-5840CN, see “To load paper 
in the paper tray#2 (MFC-5840CN only)” in 
Chapter 1 of the User's Guide.

Maximum Paper Mark

3

Installing the Phone Line 
and Power Cord

Step 1