4 Connecting the phone line; Improper Setup; Setting Up the Machine- Page 8

Setting Up the Machine

6

STEP1

8

While holding the paper tray in place, pull out 
the paper support ( ) until it clicks, and then 
unfold the paper support flap ( ).

Note

Do not use the paper support flap for Legal paper.

Note

• You can use the photo bypass tray which is 

located on the top of the paper tray to print on 
photo 4 x 6 in. (10 x 15 cm) and photo L size 
paper.

• For details, see Loading photo paper in Chapter 2 

of the User’s Guide.

 4

Connecting the phone line 

1

Connect the telephone line cord. Connect one 
end of the telephone line cord to the jack on the 
machine marked 

LINE

 and the other end to a 

modular wall jack.

Improper Setup

DO NOT connect the interface cable. 
Connecting the interface cable is done during 
the software installation process.

Note

If you are sharing one phone line with an external 
telephone, connect it as shown below.

1 Extension telephone
2 External telephone

Note

If you are sharing one phone line with an external 
telephone answering machine, connect it as 
shown below.

Set the receive mode to ‘Manual’ if you have 
an external answering machine. For details, 
see Connecting an external TAD (telephone 
answering device) in Chapter 7 of the User’s 
Guide.

2

1