Windows NT®4.0 Printing Installing the Brother Peer to Peer Software; 4.0 Printing; Install Software- Page 31

2 - 5 TCP/IP PRINTING

6

Configure the host IP address, subnet mask, and gateway address 
in that dialog. Consult your system manager for these addresses.

7

Click 

OK

 to exit (your Windows NT

®

4.0 or server will need to be 

re-booted).

Windows NT

®

4.0 Printing

Installing the Brother Peer to Peer Software

1

Start the CD-ROM installation menu program according to the 
Quick Setup Guide.

2

Select the desired Language and then select 

Install Software

. 

Then select the 

Network Print Software 

installation program.

3

Click on 

Next

 in response to the Welcome message.

4

Select the 

Brother Peer to Peer Print (LPR)

 button.

5

Select the desired directory to install the 

Brother Peer to Peer 

Print (LPR)

 files and click on 

Next

. The installation program will 

create the directory for you if it does not already exist on your 
disk.

6

Enter the Port name that you wish to use and click 

OK

. The 

default port name is BLP1. Whichever name you choose, it must 
be unique and it MUST begin with BLP.

7

You must now enter the actual IP address of the print server in 
the IP Address field. If you have edited the hosts file on your 
computer or are using Domain Name System, you can also 
enter the name of the print server. As the print server supports 
TCP/IP and NetBIOS names, you can also enter the NetBIOS 
name of the print server. The NetBIOS name can be seen in the 
printer configuration page. By default the NetBIOS name will 
appear as 

BRN_xxxxxx

 where 

xxxxxx

 is the last six digits of 

the Ethernet address.

8

Click the 

OK

 button. When prompted you must re-boot your 

computer.