Press .; Positioning the pattern on thick fabric; Hoop the fabric in the embroidery frame, and - Page 6

5

■

Positioning the pattern on thick fabric

When positioning the pattern on the fabric thicker than 
2 mm, the fabric may not be detected correctly. In order 
for the fabric to be correctly detected, its thickness must 
first be measured.

a

Hoop the fabric in the embroidery frame, and 
then attach the frame to the machine.

b

Select the pattern, and then press 

.

c

Display page 7/7 of the settings screen, and 
then set “Fabric Thickness Sensor” to “ON”.

d

Press .

e

Press .

f

Affix the embroidery positioning sticker to the 
fabric within the area indicated by the red 
frame in the LCD, and then press 

.

g

When the following message appears, remove 
the embroidery positioning sticker, and then 
press .

→

The embroidery positioning sticker affixed to the 
fabric is detected, and then the embroidery frame 
will be moved.

h

Continue with step 

e

 on page 4 to align the 

pattern with the desired embroidery position.

Memo

• This feature is functional only when the fabric is 

scanned. It will not affect embroidering if it is turned 
on with normal embroidery.

 CAUTION

• Use fabrics with a thickness of less than 3 mm 

(approx. 1/8 inch). Using fabrics thicker than 3 mm 
(approx. 1/8 inch) may cause the needle to break.