Thread the end (; immediately before the cutter.; After the Cleaning Sheet is inserted in the slot, peel of - Page 67

63

z

 APPENDIX

Maintenance

4

Thread the end (

) of the Cleaning Sheet into the slot 

immediately before the cutter.

5

After the Cleaning Sheet is inserted in the slot, peel of 
section (

) of the sheet.

6

Turn on the QL-500/550.

7

Press and hold the FEED button for at least one second. 

The roller rotates for 4" (10 cm).

8

The adhesive surface of the Cleaning Sheet removes any dirt and lint from the roller, 
and cleaning is then completed. A Cleaning Sheet can only be used one time.

• Do not peel off section (

) of the sheet.

• Make sure that the printed surface of the Cleaning Sheet is 

facing up.

1

1

2

• The length of the Cleaning Sheet is 3" (8.5 cm).
• Pressing the FEED button for less than one 

second makes the roller rotate for 1/3" (8 mm) 
only.