How to Reset the GM Oil Life System; What to Do with Used Oil- Page 265

6-15

How to Reset the GM Oil Life System

t

After changing the engine oil, the system must be reset.

1. With the engine off, turn the ignition key to RUN.

2. Fully push and release the accelerator pedal slowly

three times within five seconds.

If the CHANGE OIL SOON light flashes, 
the system is resetting.

3. Turn the key to OFF, then start the vehicle. 

The oil life will change to 100 percent.

If the CHANGE OIL SOON light comes back on,
the system has not reset. Repeat the procedure.

What to Do with Used Oil

Did you know that used engine oil contains certain
elements that may be unhealthy for your skin and could
even cause cancer? Don’t let used oil stay on your skin
for very long. Clean your skin and nails with soap and
water, or a good hand cleaner. Wash or properly throw
away clothing or rags containing used engine oil. 
See the manufacturer’s warnings about the use and
disposal of oil products.

Used oil can be a real threat to the environment. If you
change your own oil, be sure to drain all free

-

flowing 

oil from the filter before disposal. Don’t ever dispose of
oil by putting it in the trash, pouring it on the ground,
into sewers, or into streams or bodies of water. Instead,
recycle it by taking it to a place that collects used oil. 
If you have a problem properly disposing of your used
oil, ask your dealer, a service station or a local recycling
center for help.