Tail/Stop/Turn Signal Lamps- Page 287
2001 Buick Century Owner Manual
Table of Contents
6-37
Tail/Stop/Turn Signal Lamps
1. Remove the plastic wing nuts (A). (Pliers may be
required to remove the wing nuts.)
There is one wing nut located on the outside of the
carpet. The other two are located underneath the carpet.
2. Pull the taillamp housing (B) away from the body of
the vehicle.
3. Squeeze the tab on the socket and turn the socket
counterclockwise.
4. Pull out the socket.
5. Pull the old bulb out of the socket. (There are two
bulbs on each taillamp.)
6. Push in a new bulb.
7. Reverse these steps to reinstall the lamp assembly.
Detailed Information for 2001 Buick Century Owner Manual
Lists of information found in 2001 Buick Century Owner Manual - Page 287
- 1. Remove the plastic wing nuts (A).
- 2. Pull the taillamp housing (B) away from the body of the vehicle.
- 3. Squeeze the tab on the socket and turn the socket counterclockwise.
- 4. Pull out the socket.
- 5. Pull the old bulb out of the socket.
- 6. Push in a new bulb.
- 7. Reverse these steps to reinstall the lamp assembly.
Related Documents for 2001 Buick Century Owner Manual
All trademarks are property of their respective owners. Tightrope
Interactive