Heated Seat Controls; Getting to Know Your Enclave; Folding the Seatbacks- Page 8

Getting to Know Your Enclave

8

Folding the Seatbacks

To fold the seatbacks forward to create

a flat load floor:

1. Pull outward on the handle located on

the outboard side of the seat cushion

and slide the seat rearward.

2. Fold the armrest into the upright

position.

3. Pull forward on the strap located on

the outboard side of the seatback and

fold down the seatback.

To return the seatbacks upright, pull up

the seatback and push it rearward until it

locks in place.

See Section 1 of your Owner Manual.

The 3rd-row 60/40 split bench seat fea-

tures folding seatbacks. Prior to folding

a seatback, make sure all of the seat-

belts are unbuckled, nothing is on the

3rd-row seat, and the 2nd-row seat is

not reclined.

Lift the lever (A) on the upper-back

outboard corner of the seatback until the

head restraint folds forward, and then

fold down the seatback.

3rd-Row Seats

B

A

The following

heated front

seat controls

are located on

the center

console in

front of the

shift lever:

(Heated Seat/Seatback):

Press the

bottom button to turn on the heated seat

cushion and seatback.

(Heated Seatback):

Press the top

button to turn on the heated seatback.

Continue to press the desired button to

cycle through the temperature settings

of High (three indicator lights), Medium

(two indicator lights), Low (one indicator

light), and Off (no indicator lights).

See Section 1 of your Owner Manual.

Heated Seat Controls

(if equipped)

To return the seatback to the upright

position, pull the seatback strap (B) from

the rear of the vehicle or lift up the seat-

back from inside the vehicle. Pull on the

seatback to make sure it is locked in

place. Lift up the head restraint to lock it

in place.

See Section 1 of your Owner Manual.

Enclave 2008 A   1/30/07  3:38 PM  Page 8