Manual Park Release; Driving and Operating- Page 184

2019 Buick LaCrosse Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
Driving and Operating
10-Vehicle Care_en_US
Vehicle Care
background image

Buick LaCrosse Owner Manual (GMNA-Localizing-U.S./Canada-12032549) -

2019 - crc - 8/20/18

Driving and Operating

183

If the vehicle cannot shift from
P (Park), a Driver Information Center
(DIC) message will be displayed.
See your dealer for service.

Manual Park Release

{

Warning

The transmission will be placed in
N (Neutral) when the manual park
release is pulled. The vehicle can
roll and you or others could be
injured. Ensure the vehicle is on
level ground.

Caution

The manual park release is not
intended to be used for towing.
Damage may result from using
the manual park release in this
way. The repairs would not be
covered by the vehicle warranty.

Vehicles with the 3.6L V6 engine
may include a manual park release
that can be used to shift the vehicle
into N (Neutral) when the engine is
not running.

Pulling the manual park release
while the vehicle is on or turning the
ignition on while the manual park
release is pulled, will cause a
service transmission message to
display.

To place the vehicle in N (Neutral)
using the manual park release:

1. Ensure the vehicle is on level

ground and set the parking
brake. Release the brake
pedal.

2. Turn the vehicle off.

3. Use a flat-bladed tool to

remove the interior trim pieces
shown.

4. Lift the rear end of the upper

piece.

5. Slide the upper piece rearward.

6. Starting at the front, pull the

lower trim panel outward from
the console.

7. Use a flat-bladed tool to

remove the center portion of
the fastener that holds the
carpet to the console.

Detailed Information for 2019 Buick LaCrosse Owner Manual

Lists of information found in 2019 Buick LaCrosse Owner Manual - Page 184

  • 3.6L V6 engine may include a manual park release that can be used to shift the vehicle into N (Neutral) when the engine is not running.
  • 1. Ensure the vehicle is on level ground and set the parking brake.
  • 2. Turn the vehicle off.
  • 3. Use a flat-bladed tool to remove the interior trim pieces shown.
  • 4. Lift the rear end of the upper piece.
  • 5. Slide the upper piece rearward.
  • 6. Starting at the front, pull the lower trim panel outward from the console.
  • 7. Use a flat-bladed tool to remove the center portion of the fastener that holds the carpet to the console.