Transmitter Battery; Keys, Doors, and Windows; Starting the Vehicle with a Low- Page 35

2019 Buick LaCrosse Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
Driving and Operating
10-Vehicle Care_en_US
Vehicle Care
background image

Buick LaCrosse Owner Manual (GMNA-Localizing-U.S./Canada-12032549) -

2019 - crc - 8/20/18

34

Keys, Doors, and Windows

5. Place the new transmitter into

the transmitter pocket inside
the armrest storage area.

6. Press ENGINE START/STOP.

When the transmitter is learned
the DIC will show that it is
ready to program the next
transmitter.

7. Remove the transmitter from

the transmitter pocket and
press

K

.

To program additional
transmitters, repeat Steps 4

6.

When all additional transmitters
are programmed, press and
hold ENGINE START/STOP
button for 12 seconds to exit
programming mode.

8. Put the key back into the

transmitter.

9. Replace the key lock cylinder

cap. See

Door Locks

0

37

.

Starting the Vehicle with a Low
Transmitter Battery

When starting the vehicle, if the
transmitter battery is weak or there
is interference with the signal, the
DIC may display NO REMOTE
DETECTED or NO REMOTE KEY
WAS DETECTED PLACE KEY IN
TRANSMITTER POCKET THEN
START YOUR VEHICLE.

To start the vehicle:

1. Place the transmitter in the

transmitter pocket inside the
armrest storage area.

2. With the vehicle in P (Park) or

N (Neutral), press the brake
pedal and ENGINE START/
STOP. See

Starting the Engine

0

177

for additional information

about the vehicle's keyless
ignition with pushbutton start.

Replace the transmitter battery as
soon as possible.

Detailed Information for 2019 Buick LaCrosse Owner Manual

Lists of information found in 2019 Buick LaCrosse Owner Manual - Page 35

  • 5. Place the new transmitter into the transmitter pocket inside the armrest storage area.
  • 6. Press ENGINE START/STOP.
  • 7. Remove the transmitter from the transmitter pocket and press K .
  • 6. When all additional transmitters are programmed, press and hold ENGINE START/STOP button for 12 seconds to exit programming mode.
  • 8. Put the key back into the transmitter.
  • 9. Replace the key lock cylinder cap.
  • 1. Place the transmitter in the transmitter pocket inside the armrest storage area.
  • 2. With the vehicle in P (Park) or N (Neutral), press the brake pedal and ENGINE START/ STOP.