Compact Disc Messages; 6 RAND (Random):- Page 168

3-20

3 

AA

 (Reverse): Press and hold this pushbutton to

quickly reverse within a track. You will hear sound at a
reduced level. Release it to play the passage.

4 

""

 (Forward): Press and hold this pushbutton to

quickly advance within a track. You will hear sound at a
reduced level. Release it to play the passage.

6 RAND (Random): Press this pushbutton to hear the
tracks in random, rather than sequential, order. Press it
again to turn off random play.

RECALL: Press this button to see which track is
playing. Press it again within five seconds to see how
long it has been playing. To change what is normally
shown on the display (track or elapsed time), press this
button until you see the display you want, then hold this
button until the display flashes.

AM

-

FM: Press this button to listen to the radio when a

CD is playing.

SOURCE: Press this button to play a cassette tape or a
CD when listening to the radio. TAPE SIDE and an
arrow will appear on the display. If this button is pressed
again, the system will go to disc play; CD PLAY will
appear on the display.

 SEEK 

: Press the up or down arrow to go to the

previous or next track on the CD. The sound will mute
while seeking.

EJECT: Press this button, located next to the CD slot,
to stop a CD when it is playing and to remove a CD
when it is not playing. Eject may be activated with the
radio off.

Compact Disc Messages

E (Error): If you’re driving on a very rough road or if
it’s very hot, the disc may not play and an E and a
number may appear on the display. When the road
becomes smooth or the temperature returns to normal,
the disc should play. If the disc comes out, it could be
for one of the following reasons:

D E20: The disc is upside down.
D E20: It is dirty, scratched or wet.
D E20: There’s too much moisture in the air. 

(Wait about an hour and try again.)

If the CD is not playing correctly, for any other reason,
try a known good CD.

If any error occurs repeatedly or if an error can’t be
corrected, contact your dealer. If your radio displays an
error number, write it down and provide it to your dealer
when reporting the problem.