Engine Air Cleaner/Filter; Operating the engine with the air cleaner/filter; off can cause you or others to be burned. The air- Page 272

2002 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Section 1 Seats and Restraint Systems
Section 2 Features and Controls
Section 3 Comfort Controls and Audio Systems
Section 4 Your Driving and the Road
Section 6 Service and Appearance Care
Section 7 Maintenance Schedule
Section 8 Customer Assistance Information
background image

6-18

Engine Air Cleaner/Filter

The engine air cleaner/filter is located underneath a
diagonal brace in the engine compartment on the
driver’s side of the vehicle. See “Engine Compartment
Overview” in the Index for more information 
on location.

To check or replace the engine air cleaner/filter, 
do the following:

1. Loosen the wing nut on the air duct.

2. Lift up on the two clips

located on the top of 
the filter assembly.

3. Then disconnect the duct and reposition it while

removing the side cover.

4. Pull out the filter.

5. Replace the filter if needed.

6. Be sure to reinstall the filter and install the cover

tightly when you are finished.

Refer to the Maintenance Schedule to determine when to
replace the air filter.

See “Scheduled Maintenance Services” in the Index.

CAUTION:

Operating the engine with the air cleaner/filter
off can cause you or others to be burned. The air
cleaner not only cleans the air, it stops flame if
the engine backfires. If it isn’t there, and the
engine backfires, you could be burned. 
Don’t drive with it off, and be careful working 
on the engine with the air cleaner/filter off.

Detailed Information for 2002 Buick Regal Owner Manual

Lists of information found in 2002 Buick Regal Owner Manual - Page 272

  • 1. Loosen the wing nut on the air duct.
  • 2. Lift up on the two clips located on the top of the filter assembly.
  • 3. Then disconnect the duct and reposition it while removing the side cover.
  • 4. Pull out the filter.
  • 5. Replace the filter if needed.
  • 6. Be sure to reinstall the filter and install the cover tightly when you are finished.