Tail/Stop/Turn Signal Lamps- Page 295

6-41

Tail/Stop/Turn Signal Lamps

1. Open the trunk

2. If your vehicle is equipped with a convenience net,

remove it.

3. Remove the three plastic wing nuts (A).

There is one wing nut located on the outside of 
the carpet. The other two are located underneath 
the carpet.

4. Pull the taillamp housing (B) away from the body 

of the vehicle.

5. Squeeze the tab on the socket and turn the 

socket counterclockwise.

6. Pull out the socket.

7. Pull the old bulb out of the socket. 

(There are two bulbs on each taillamp.)

8. Push in a new bulb.

9. Reverse these steps to reinstall the lamp assembly.