Operation; Panic Alarm; Security Feedback- Page 75

2-11

Operation

Press UNLOCK once to
unlock the driver’s door and
to turn on the interior lamps
(see “Illumination on
Remote Activation” in the
Index for more details).

The perimeter lighting feature will also be activated at
night, turning on your headlamps and back

-

up lamps for

approximately 25 seconds when the UNLOCK button is
pressed. (This will light the area around the vehicle.)
See “Perimeter Lighting” in the Index.

Press UNLOCK again within five seconds to unlock all
the doors. To lock all doors, press LOCK. To unlock the
trunk, press the button with the trunk symbol on the
remote keyless entry transmitter. The trunk will only
unlock if your transaxle is in PARK (P).

Panic Alarm

This feature allows you to activate an alarm by pressing a
button on the remote keyless entry transmitter. Your
ignition must be off for the panic alarm to work. When
you press the panic button with the horn symbol on it the
remote keyless entry transmitter, the headlamps will
flash, the horn will honk repeatedly, and the interior
lamps will illuminate, attracting attention if you need it.
The alarm will continue until one of the following occurs:

D

You press the panic button on the remote keyless
entry transmitter a second time,

D

the ignition moved to RUN, or

D

an alarm period of about two minutes has elapsed.

Security Feedback

Security feedback provides audible and/or visible
feedback confirming that a remote keyless entry lock 
or unlock command has been received and executed.
The ignition must be off for this feature to work.

You may select one of four operating modes for reception
of a lock command. You may also select one of four
operating modes for reception of an unlock command.
The selection and programming of the lock and unlock
operating modes are independent of each other.