Care of Your Cassette Tape Player- Page 173

3-25

Care of Your Cassette Tape Player

A tape player that is not cleaned regularly can cause
reduced sound quality, ruined cassettes or a damaged
mechanism. Cassette tapes should be stored in their
cases away from contaminants, direct sunlight and
extreme heat. If they aren’t, they may not operate
properly or may cause failure of the tape player.

Your tape player should be cleaned regularly after every
50 hours of use. Your radio may display CLN to indicate
that you have used your tape player for 50 hours without
resetting the tape clean timer. If this message appears 
on the display, your cassette tape player needs to be
cleaned. It will still play tapes, but you should clean it as
soon as possible to prevent damage to your tapes and
player. If you notice a reduction in sound quality, try a
known good cassette to see if it is the tape or the tape
player at fault. If this other cassette has no improvement
in sound quality, clean the tape player.

The recommended cleaning method for your cassette
tape player is the use of a scrubbing action,
non

-

abrasive cleaning cassette with pads which scrub

the tape head as the hubs of the cleaner cassette turn.
The recommended cleaning cassette is available through
your dealer (GM Part No. 12344789).

When cleaning the cassette tape player with the
recommended non

-

abrasive cleaning cassette, it is

possible that the cassette may eject, because the cut tape
detection feature on your radio may recognize it as a
broken tape. If the cleaning cassette ejects, insert the
cassette at least three times to ensure thorough cleaning.

You may also choose a non

-

scrubbing action, wet

-

type

cleaner which uses a cassette with a fabric belt to clean
the tape head. This type of cleaning cassette will not
eject on its own. A non

-

scrubbing action cleaner may

not clean as thoroughly as the scrubbing type cleaner.
The use of a non

-

scrubbing action, dry

-

type cleaning

cassette is not recommended.

After you clean the player, press and hold the EJECT
button for five seconds to reset the CLN indicator. The
radio will display 

---

 to show the indicator was reset.

Cassettes are subject to wear and the sound quality 
may degrade over time. Always make sure the cassette
tape is in good condition before you have your tape
player serviced.