Note ; 9-4. Vehicle status check - Page 21

21 

9-4. Vehicle status check 

This operation can be performed before or after the engine start operation. 

1) Press the function switch until it 

beeps. 

The LCD display will appear as shown 

on the right. 

After the send mark flashes, the send 

operation is completed. After the send 

operation is completed, the controller 

will send an answer back signal. 

 
When the remote control receives a 

response from the vehicle, it indicates 

the engine start operation with a 

display (on the right) and a melody. 

The following 2 items can be checked. 

・ 

Is the engine running? 

・ 

Is the rear defrost turned on? 

Some vehicle models stop the rear 
defrost after 15 minutes. 
Condition error display (p.16) does not 
appear. 

Note 

Function switch 

【

Display Example

】

Engine running

Engine stopped 

Rear defrost is turned on. 

Displays 
when engine 
starts 

Displays 
when engine 
stops 

Displays when 
rear defrost is 
turned on