Close Proximity Warning; Multi-information Display; Active Driving Display- Page 256

If there is a problem with the Mazda Radar Cruise Control with Stop & Go function (MRCC
with Stop & Go function) system, a message is displayed on the multi-information display.
Check the center display to verify the problem and then have your vehicle inspected by an
Authorized Mazda Dealer.
Refer to Message Indicated on Display on page 7-38.

▼

Close Proximity Warning

If your vehicle rapidly closes in on the vehicle ahead because the vehicle ahead applies the
brakes suddenly while you are traveling in headway control, the warning sound activates
and the brake warning is indicated in the display. Always verify the safety of the
surrounding area and depress the brake pedal while keeping a safer distance from the
vehicle ahead. Additionally, keep a safer distance from the vehicles behind you.

Multi-information Display

Active Driving Display

NOTE

In the following cases, the warnings and brakes may not operate even if your vehicle starts
closing in on the vehicle ahead.



You are driving your vehicle at the same speed as the vehicle ahead.



Directly after the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop
& Go function) system has been set.



Directly after the accelerator pedal is released.



Another vehicle cuts into the driving lane.

▼

Setting the System

The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system operates when all of the following conditions are met.



Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph)



The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) is turned on.



The brake pedal is not depressed.



The electric parking brake (EPB) is released (electric parking brake (EPB) indicator light
is turned off).



There is no problem with the DSC.

When Driving

i-ACTIVSENSE

4-118

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26