When Driving; Indication on multi-information; Indication on active driving dis-- Page 260

Distance-between-vehicles guide-

line

(at 80 km/h (50 mph) vehicle

speed)

Indication on multi-information

display

Indication on active driving dis-

play

*1

Extremely short (about 25 m (82 ft))

*

1 Displays a pop-up image in the active driving display only when the driver operates the switch.

NOTE



The distance-between-vehicles differs depending on the vehicle speed, and the slower the
vehicle speed, the shorter the distance.



When the ignition is switched to ACC or OFF and then the engine is started again, the
system automatically sets the distance-between-vehicles to the previous setting.

How to change the set vehicle speed

To accelerate/decelerate using the SET
switch

When you press the SET  switch, the
vehicle accelerates and when you press the
SET  switch, it decelerates.

Short press

1 km/h (1 mph)

Long press

10 km/h (5 mph)

NOTE

For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).

To increase speed using accelerator
pedal

Depress the accelerator pedal and press
and release the SET  switch or SET
switch at the desired speed. If the switch is
not operated, the system returns to the set
speed after you release your foot from the
accelerator pedal.

CAUTION

The warnings and brake control do not
operate while the accelerator pedal is
depressed.

NOTE



The setting speed can be changed by
operating the SET  switch or SET
switch during stop hold control.

When Driving

i-ACTIVSENSE

4-122

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26