When Driving; Turning on the system- Page 257



All the doors are closed.



The driver's seat belt is fastened.



The selector lever is in the drive (D) position or manual (M) position (manual mode).

NOTE



In the following cases, the Mazda Radar Cruise Control with Stop & Go function (MRCC
with Stop & Go function) system is canceled when the vehicle is traveling at 30 km/h (19
mph) or less and “Mazda Radar Cruise Control disabled under 30 km/h” is displayed in
the multi-information display.



The Forward Sensing Camera (FSC) cannot detect target objects (There is problem
with the Forward Sensing Camera (FSC) or windshield is dirty).



There is a problem with the stop hold control function.



There is a problem with the electric parking brake (EPB).



It may not be possible to set the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) system directly after starting the engine, while the DSC
operation is being checked.

CANCEL switch

RES switch

OFF switch

switch

switch

MODE switch

SET- switch

SET+ switch

Turning on the system

When the MODE switch is pressed once, the Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function) system turns on, and the Mazda Radar Cruise
Control with Stop & Go function (MRCC with Stop & Go function) system main indication
(white) turns on and the vehicle speed and the distance between the vehicles while in
headway control can be set.

When Driving

i-ACTIVSENSE

4-119

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26