2001/10/02
CHAPTER 6 EPSON - 12
User reset
EscCR!#R
(27)(13)(33)#(82)
<1Bh><0Dh><21h>#<52h>
•
# = 0, the printer restores to the current user setting.
•
# = 1, the printer restores to user settings 1.
•
# = 2, the printer restores to user settings 2.
Paper Input Control
EscEMn
(27)(25)n
<1Bh><19h>n
n
Value
HL-1660e/2060/2400C/2400Ce/3400CN/3260N/2460
n
= 0
Initialize the feeder mode.
n
= 1
Feed from the MP tray.
n
= 2
Feed from Tray 1.
n
= 3
Feed from Tray 2.
n
= 4
Feed from Tray 3.
n
= 5
Feed from Tray 4.
n
= R
Eject paper.
n
Value
HL-1050
n
= 0
Initialize the feeder mode.
n
= 1/2
Feed from the tray.
n
= R
Eject paper.
n
Value
HL-1250/1270N/1450/1470N/P2500/1650/1670N
n
= 0
Initialize the feeder mode.
n
= 1
Feed from the Tray 1.
n
= 2
Feed from the Tray 2.
n
= R
Eject paper.
Enable out-of-paper sensor
Esc9
(27)(57)
<1Bh><39h>
The printer ignores this command.
Disable out-of-paper sensor
Esc8
(27)(56)
<1Bh><38h>
The printer ignores this command.
6.2.
Page set up
Set page length
EscC
n
(27)(67)n
<1Bh><43h>n
This command sets the page length in lines.
or
EscCNULn (27)(67)(00)n
<1Bh><43h><00h>n
•
This command sets the page length in inches.
•
The top of form position is set to be the current line.
•
n
is the number of lines that make up one page, or the length of the page in inches, according to which
form of the command is used.
•
If the first form of the command is used (
n
= the number of lines in the page) the current line spacing
setting is used to determine the length of the page.
•
If the first form of the command is used,
n
must be in the range 1 to 127.