Esc1 ; Esc3n ; Escjn - Page 278

2001/10/02 

CHAPTER 6 EPSON - 15 

Select 7/72" line spacing  

Esc1  

(27)(49) 

<1Bh><31h> 

• 

This command sets the line spacing to 7/72".  All subsequent line feed operations will move the print 
position 7/72" down the page. 

• 

Since the printer resolution is 600 dots per inch the line spacing will not be exactly 7/72". 

LPRINT CHR$(27); CHR$(49); 'Set line spacing to 7/72". 

Select n/72" line spacing 

EscAn 

(27)(65)n   

<1Bh><41h>n 

• 

This command sets the line spacing to 

n

/72".  All subsequent line feed operations will move the print 

position 

n

/72" down the page. 

• 

Since the printer’s resolution is 600 dots per inch the line spacing will not be exactly 

n

/72". 

• 

n

 must be in the range 1 to 85. 

• 

If 

n

 is outside the range 1 to 85 the default line spacing, 1/6" is selected. 

LPRINT CHR$(27); CHR$(65); CHR$(10); 'Set line spacing of 10/72". 

Select n/216" line spacing 

Esc3n 

(27)(51)n   

<1Bh><33h>n 

• 

This command sets the line spacing to 

n

/216".  All subsequent line feed operations will move the print 

position 

n

/216" down the page. 

• 

Since the printer’s resolution is 600 dots per inch the line spacing will not be exactly 

n

/216". 

• 

n

 must be in the range 1 to 255. 

LPRINT CHR$(27); CHR$(51); CHR$(25); 'Select line spacing of 25/216". 

Perform n/216" line feed 

EscJn 

(27)(74)n   

<1Bh><4Ah>n 

• 

This command performs a single line feed, moving the print position down the page by 

n

/216". 

• 

This command does not perform a carriage return. 

• 

The current line spacing setting is not affected. 

• 

n

 must be in the range 0 to 255. 

• 

The actual vertical distance moved may not be exactly the distance you specify due to the printer’s 
600 dots per inch resolution. 

LPRINT CHR$(27); CHR$(74); CHR$(54); '1/4" line feed 

Perform n/216" reverse line feed 

Escjn 

(27)(106)n  

<1Bh><6Ah>n 

This command performs a single reverse line feed, moving the print position up the page by 

n

/216". 

• 

This command does not perform a carriage return. 

• 

The current line spacing setting is not affected. 

• 

n

 must be in the range 0 to 255. 

• 

The actual vertical distance moved may not be exactly the distance you specify due to the printer’s 
600 dots per inch resolution. 

LPRINT CHR$(27); CHR$(106); CHR$(108); '1/2" line feed