Commands Descriptions ; Format ; Parameter - Page 431

2001/10/02 

APPENDIX D REFERENCE LIST OF MX-2000/4000/5000 SERIES UNIQUE COMMANDS - 5

3. 

COMMAND REFERENCE LIST 

This section describes the specific commands as listed below used to support the functions of the Mailbox unit. 

1)  PJL output tray & mode setting  

2)  PJL mailbox protection & bin number setting  

3)  PJL avoidance of output bin full  

4)  PCL output tray setting  

5)  PS output tray & mode setting  

6)  PS mailbox protection & bin number setting  

For the details on each command, refer to the following sections.  

3.1. 

Commands Descriptions 

3.1.1.  PJL output tray & mode setting 

Format 

@PJL SET/DEFAULT OUTBIN=

TrayName

Parameter 

TrayName* 

• 

UPPER: 

Select the printer face-down output tray. 

• 

OPTIONALOUTPUTBIN1: 

Select the #1 bin of the Mailbox unit. 

• 

OPTIONALOUTPUTBIN2: 

Select the #2 bin of the Mailbox unit. 

• 

OPTIONALOUTPUTBIN3: 

Select the #3 bin of the Mailbox unit. 

• 

OPTIONALOUTPUTBIN4: 

Select the #4 bin of the Mailbox unit. 

• 

OPTIONALOUTPUTBIN5: 

Select the #5 bin of the Mailbox unit. (except HL-3260) 

• 

OPTIONALOUTPUTBIN6: 

Select the #6 bin of the Mailbox unit (except HL-3260) 

• 

OPTIONALOUTPUTBIN7: 

Select the #7 bin of the Mailbox unit. (except HL-3260) 

• 

OPTIONALOUTPUTBIN8: 

Select the #8 bin of the Mailbox unit. (except HL-3260) 

• 

OPTIONALOUTPUTBIN9: 

Select the #9 bin of the Mailbox unit. (except HL-3260) 

• 

OPTIONALOUTPUTBIN10: 

Select the #10 bin of the Mailbox unit. (except HL-3260) 

• 

ALLSTACKER: 

Select the stacker function. ** 

• 

ALLSORTER: 

Select the sorter function. ** 

* = The tray names are compatible with the HP tray naming. 
** = These are unique tray names (parameters) for the HL-2060/2460/3260. 

Default = ALLSTACKER 

Explanation 

• 

This command selects the specified output tray and output mode, trays defined as Mailboxes are numbered 
from the bottom of the unit upwards 

• 

This command is ignored when there is no specified tray. 

• 

The 

ALLSTACKER

 and 

ALLSORTER

 parameters are executed for all output trays other than the ones which 

are defined and protected as mailboxes.  (Refer to Section 3.1.2 ‘PJL mailbox protection & tray number 
setting’.) 

• 

The difference between the SET and DEFAULT selection and the effective period of this setting follow the 
PJL specifications.