Format ; Parameter ; Explanation - Page 432

2001/10/02

APPENDIX D REFERENCE LIST OF MX-2000/4000/5000 SERIES UNIQUE COMMANDS - 6

3.1.2.  PJL mailbox protection & bin number setting 

Format 

@PJL SET/DEFAULT MAILBOXPROTECT=

TrayNumber

Parameter 

TrayNumber 

<HL-2060/2460> 

• 

Lower unit: 

#1 to 5 from bottom to top 

• 

Lower unit + Upper unit: 

#1 to 10 from bottom to top 

<HL-3260> 

#1 to 4 from bottom to top 

Default = 0 

Explanation 

• 

This command sets the bins with numbers larger than the TrayNumber specified as mailbox use only.  They 
cannot then be used for either stacker or sorter functions. 

• 

If the bin number is set to 0, the mailbox protection is released, then all bins can be used for stacker and sorter 
functions. 

• 

If the bin number is set out of the effective range, this command is ignored. 

<HL-2060/2460> 

Setting type 

Effective range 

• 

MX not installed 

0 

• 

Lower unit installed 

0, 1 

∼

 5 

• 

Lower & upper unit installed 

0, 1 

∼

 10 

<HL-3260> 

Setting type 

Effective range 

• 

MX not installed 

0 

• 

MX installed 

0, 1 

∼

 4 

• 

The difference between the SET and DEFAULT selection and the effective period of this setting follow the 
PJL specifications. 

3.1.3.  PJL avoidance of mailbox bin full 

Command 

@PJL SET/DEFAULT AVOIDMAILBOXFULL=

ON/OFF

Parameter 

ON/OFF 

• 

OFF

: 

Paper is ejected to the printer face-down output tray when the specified tray is full. 

• 

ON

: 

Paper is not ejected to the printer face-down output tray even when the specified tray is full. 

Default = OFF 

Explanation 

• 

When paper is ejected into a bin specified by a setting command which limits the bin selection, this command 
selects whether to eject automatically paper to the printer face-down output tray or not when the specified bin  
is full. 

• 

The difference between the SET and DEFAULT selection and the effective period of this setting follow the 
PJL specifications.