Adjusting the Label Length Accuracy; Attaching Labels- Page 57

1

2

3

4

5

6

7

8

9

55

z

 LABEL

 PRINT

ING

Adjusting the Label Length Accuracy

You can adjust the accuracy of the printed label length in increment of -5 to +5.

Press the 

 key to display the setup menu, select 

"Adjust Length" using the   or   key, and then press 
the  

or  

key.

Select "Adjust Length" by using the   or   key, and 
then set the value by using the   or   key.

Press the 

 or   key to apply the setting.

If necessary, trim the printed label to the desired shape and length using scissors, 
etc.

Peel the backing from the label.

Position the label and then press firmly from top to bottom with your finger to 
attach the label.

Adjusting the Label Length Accuracy

1

2

3

• Press the 

 key to return to the previous step.

• Press the 

 key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.

Attaching Labels

1

2

3

• The backing of some types of tapes may be pre-cut to make it easier to peel the backing.
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven.  The labels may peel 

off easily from these surfaces.

• Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive 

Tapes or other special tapes and observe all precautions noted in the instructions.