CONNECTING THE P-TOUCH TO A COMPUTER; To connect the P-touch to the computer:- Page 11

7

CONNECTING THE P-TOUCH TO A COMPUTER

This machine is equipped with an interface connector, allowing you to print labels and stamps
that you have created with the P-touch Editor software installed on your IBM PC-compatible
computer or Macintosh.

To connect the P-touch to the computer:

1

Turn off both the P-touch and the computer.

2

Insert the small plug on the interface cable into the interface connector on the right side of
the P-touch.

☞

Only use the interface cable designed exclusively for this machine.

3

On an IBM PC-compatible: Insert the 9-pin plug into the serial (COM) port of your com-
puter and tighten the screws to lock it into place.
On a Macintosh: Insert the 8-pin plug into the printer (serial) port of your computer.

4

Turn on the P-touch, and then start up the computer.

5

Hold down 

 and press 

 to enter 

Interface

 mode.

☞

In 

Interface

 mode, the baud rate of the P-touch can be changed by holding down

 and pressing 

 until the desired setting appears (

57600 bps

, 

115200 bps

,

or 

9600 bps

). Release the keys to apply the desired setting.

Code

Code

'

?

.

'

Interface

?

.

Code

Code

Style

$
4

Style

$
4