Reception into Memory; If the MEMORY RECEPTION setting is ON at this time…; If the MEMORY RECEPTION setting is OFF at this time…- Page 51

41

S E T U P   R E C E I V E

NOTE:

■

When you use Auto Reduction to reduce incoming
documents to fit on one page of recording paper, you can do
so only as long as the original document is not longer than
35 cm. If the original is longer than 35 cm, the data will not
be reduced and will carry over to print on a second page.

■

When you use Auto Reduction and you receive an incoming
document that is smaller than your recording paper, no
reduction will take place, and you will get the same size
recorded as the original.

Reception into Memory

As soon as the paper cassette becomes empty during fax reception, the
screen will display CHECK PAPER; please put some paper in the paper
cassette (see chap. 1).

If the MEMORY RECEPTION setting is ON at this time…

The current fax reception will continue, with the remaining page(s) being
stored in memory, subject to available memory. Subsequent incoming
faxes will also be stored into memory until the memory is full, following
which no further incoming fax calls will be automatically answered; all
data will be printed as soon as fresh paper is put in the paper cassette.

If the MEMORY RECEPTION setting is OFF at this time…

The current fax reception will continue, with the remaining page(s) being
stored in memory, subject to available memory. Subsequent incoming fax
calls will not be automatically answered until fresh paper is put in the
paper cassette. The last fax received will be printed as soon as fresh
paper is put in the cassette.

1

Press 

Menu

, 

2

, 

6

.

The screen displays

6.MEM.RECEIVE

2

Use   or   to select ON or OFF.

3

Press 

Set

 when the screen displays your selection.

4

Press 

Stop

 to exit.