Automatic Fabric Sensor System ; Press .; Press - Page 87

USEFUL FUNCTIONS

Se

wi
n

g Ba

sics

73

2

c

Place the fabric under the presser foot with 
the needle at the starting point of the 
stitching, and then press the “Start/Stop” 
button. The machine will begin sewing.

d

Press the “Start/Stop” button to stop the 
machine at the point where the sewing 
direction changes.

o

The machine stops with the needle in the fabric, and 
the presser foot is raised.

e

Rotate the fabric, and then press the “Start/
Stop” button.

o

The presser foot is automatically lowered, and 
sewing continues.

Automatic Fabric Sensor System 
(Automatic Presser Foot 
Pressure)

The thickness of the fabric is automatically 
detected and the presser foot pressure is 
automatically adjusted with an internal sensor 
while sewing, to insure that your fabric is fed 
smoothly. The fabric sensor system works 
continuously while sewing. This function is useful 
for sewing over thick seams (see page 63), or 
quilting (see page 102).

a

Press .

o

The settings screen appears.

b

Set “Automatic Fabric Sensor System” to 
“ON”.

c

Press 

 to return to the original screen.

Memo

• If you press the “Start/Stop” button to pause 

sewing, press it again to continue, reverse 
stitches (or reinforcement stitches) will not 
be sewn.