Cutting the thread; When you wish to finish the stitching and the ; sewing machine is stopped, press - Page 61

Sewing    

55

2

Cutting the thread

When you have finished sewing, cut the threads.

1

When you wish to finish the stitching and the 
sewing machine is stopped, press 

(needle position button) once to raise the 
needle.

1

Needle position button

X

The needle is raised.

2

Raise the presser foot lever.

1

Presser foot lever

3

Pull the fabric to the left side of the machine, 
and then pass the threads through the thread 
cutter to cut them.

1

Thread cutter

■

Using the thread cutter button
(Only for models equipped with the thread 
cutter button)

1

When you wish to finish the stitching, press 

 (thread cutter button) once.

1

Thread cutter button

X

The threads are cut and the needle is raised.

2

Raise the presser foot lever.

1

Presser foot lever

Note

●

Do not press the thread cutter button if there 
is no fabric under the presser foot or while 
the machine is sewing, otherwise damage to 
the machine may occur.

●

When cutting thread thicker than #30, 
nylon thread or other special thread, use the 
thread cutter on the side of the machine.

1

1

1

●

Do not press the thread cutter button 
after the threads have already been cut, 
otherwise the needle may break, the 
threads may become tangled or damage 
to the machine may occur.

1

1

CAUTION

S3_brotherE.book  Page 55  Wednesday, February 12, 2003  11:49 AM