Using the optional quilting guide; Insert the stem of the quilter into the hole at ; the rear of the walking foot or presser foot - Page 98

UTILITY STITCHES 

———————————————————————————————————————————————————————

92

■

Using the optional quilting guide

Use the quilting guide to sew parallel stitches that 
are equally spaced.

1

Insert the stem of the quilter into the hole at 
the rear of the walking foot or presser foot 
holder.

Walking foot

Presser foot holder

2

Adjust the stem of the quilter so that the quilt 
guide aligns with the seam that has already 
been sewn.

Free-motion quilting

With free-motion quilting, the feed dogs can be 
lowered (using the drop feed lever) so that the fabric 
can be moved freely in any direction.
The optional quilting foot is needed for free-motion quilting.

1

Remove the presser foot and the presser foot 
holder.

• Refer to “Removing the presser foot holder” 

(page 43).

2

Align the quilting foot with the lower-left side 
of the presser bar.

The pin on the quilting foot should be 
positioned over the needle clamp screw.

1

Pin on quilting foot

2

Presser foot holder screw

3

Needle clamp screw

3

Hold the quilting foot in place with your right 
hand, and then tighten the presser foot holder 
screw using the screwdriver in your left hand.

1

Presser foot holder screw

●

Be sure to securely tighten the screws 
with the screwdriver, otherwise the 
needle may touch the presser foot, 
causing it to bend or break.

2

3

1

1

CAUTION

S3_brotherE.book  Page 92  Wednesday, February 12, 2003  11:49 AM