Near Empty Black- Page 71

Brother DCP-135C User Manual

2014 Dodge Charger SRT Owner Manual

Table of Contents

USER’S GUIDE DCP-135C DCP-150C
background image

Troubleshooting and Routine Maintenance

63

B

f

Lift each lock release lever and push it 
until it clicks, and then close the ink 
cartridge cover.

 

g

The machine will automatically reset the 
ink dot counter.

Note

• If you replaced an ink cartridge, for 

example Black, before the LCD shows 

Near Empty Black

 or 

Ink Empty Black

, the LCD will ask you 

to verify that it was a brand new one 
(

Did You Change Blck?

). For each 

new cartridge you installed, press 

a

 (

Yes

to automatically reset the ink dot counter 
for that colour. If the ink cartridge you 
installed is not a brand new one, be sure 
to press 

b

 (

No

).

• If the LCD shows 

No Cartridge

 after 

you install the ink cartridge, check that the 
ink cartridges are installed properly.

 

WARNING

 

If ink gets in your eyes, wash them out with 
water at once and call a doctor if you are 
concerned.

 

CAUTION

 

DO NOT take out ink cartridges if you do 
not need to replace them. If you do so, it 
may reduce the ink quantity and the 
machine will not know the quantity of ink left 
in the cartridge.

 

 

DO NOT touch the cartridge insertion slots. 

If you do so, the ink may stain your skin.

 

 

If ink stains your skin or clothing, wash with 
soap or detergent at once. 

 

 

If you mix the colours by installing an ink 
cartridge in the wrong position, clean the 
print head several times after correcting the 
cartridge installation.

 

 

Once you open an ink cartridge, install it in 

the machine and use it up within six months 
of installation. Use unopened ink cartridges 
by the expiration date written on the 
cartridge package.

 

 

DO NOT dismantle or tamper with the ink 
cartridge, this can cause the ink to leak out 
of the cartridge.

 

 

Brother multifunction machines are 
designed to work with ink of a particular 
specification and will work to a level of 
optimum performance when used with 
genuine Brother Branded ink cartridges. 
Brother cannot guarantee this optimum 

performance if ink or ink cartridges of other 
specifications are used. Brother does not 
therefore recommend the use of cartridges 
other than genuine Brother Branded 
cartridges or the refilling of empty 
cartridges with ink from other sources. If 

damage is caused to the print head or other 
parts of this machine as a result of using 
incompatible products with this machine, 
any repairs required as a result may not be 
covered by the warranty.

 

Detailed Information for Brother DCP-135C User Manual

Lists of information found in Brother DCP-135C User Manual - Page 71

  • If you replaced an ink cartridge, for example Black, before the LCD shows Near Empty Black or Ink Empty Black , the LCD will ask you to verify that it was a brand new one ( Did You Change Blck?
  • If the LCD shows No Cartridge after you install the ink cartridge, check that the ink cartridges are installed properly.

FAQ (Frequently Asked Questions) for Brother DCP-135C User Manual - Page 71

  • Troubleshooting and Routine Maintenance 63 B f Lift each lock release lever and push it until it clicks, and then close the ink cartridge cover. g The machine will automatically reset the ink dot counter. Note • If you replaced an ink cartridge, for example Black, before the LCD shows Near Empty Black or Ink Empty Black , the LCD will ask you to verify that it was a brand new one ( Did You Change Blck?

Related Documents for Brother DCP-135C User Manual