3 Connecting the power cord; 4 Installing the ink cartridges; Improper Setup- Page 8

Setting Up the Machine

6

STEP 1

8

While holding the paper tray in place, pull out 
the paper support   until it clicks, and then 
unfold the paper support flap  .

Note

Do not use the paper support flap   for Legal size 
paper.

Note

You can use the photo bypass tray which is 
located on the top of the paper tray to print on 
photo 4

×

6 in. (10

×

15 cm) and photo L size paper.

For details, see Loading photo paper in Chapter 2 
of the User’s Guide.

 3

Connecting the power cord

1

Connect the power cord.

Improper Setup

DO NOT connect the interface cable. 
Connecting the interface cable is done during 
the software installation process.

Note

The control panel warning LED will stay on until 
you have installed the ink cartridges.

 4

Installing the ink cartridges

Warning

If ink gets in your eyes, wash them out with water 
at once, and if irritation occurs consult a doctor.

1

Make sure that the power is turned on.
The LCD shows: 

No Cartridge

Black
Yellow

Cyan

Magenta

2

Open the ink cartridge cover (1).

3

Pull all the lock release levers down and 
remove the yellow protective part (1).

Note

Do not throw away the yellow protective part. You 
will need it if you transport the machine.

1

1