Error Message; Copy operation in progress; Print operation in process- Page 68

56

Fuser Error

The temperature of fuser unit 
does not rise at a specified 
temperature within specified time.

Turn the power switch off, wait a few 
seconds, and then turn it on again. Leave the 
machine for 15 minutes with the power on.

The fuser unit is too hot.

Init Unable XX

The machine has a mechanical 
problem.

Disconnect the machine from the power for 
several minutes and then reconnect it.

Jam Rear

The paper is jammed in the back 
of the machine.

(See 

Paper jams

 on page 58.)

Jam Inside

The paper is jammed inside the 
machine.

(See 

Paper jams

 on page 58.)

Jam Tray

The paper is jammed in the paper 
tray of the machine.

(See 

Paper jams

 on page 58.)

No Paper

The machine is out of paper or 
paper is not properly loaded in the 
paper tray.

Do one of the following:

„

Refill the paper in the paper tray, and 
then press 

Start

.

„

Remove the paper and load it again, and 
then press 

Start

.

Out of Memory

The machine’s memory is full.

Copy operation in progress

Do one of the following:

„

Press 

Start

 to copy the scanned pages.

„

Press 

Stop/Exit

 and wait until the other 

operations in progress finish, and then try again.

„

Clear the data from the memory. (See 

Out of memory message

 on page 29.)

Print operation in process

Reduce print resolution. (See 

Advanced tab 

in the Software User’s Guide on the 
CD-ROM

.)

Print Unable XX

The machine has a mechanical 
problem.

Disconnect the machine from the power for 
several minutes and then reconnect it.

Scan Unable XX

The machine has a mechanical 
problem.

Disconnect the machine from the power for 
several minutes and then reconnect it.

Toner Life End

The drum unit and toner cartridge 
assembly may have been 
installed improperly, or the toner 
cartridge is used up and printing 
is not possible.

Do one of the following:

„

Re-install the toner cartridge and drum 
unit assembly.

„

Replace the empty toner cartridge with a 
new one. (See 

Replacing a toner 

cartridge

 on page 70.)

Toner Low

If the LCD shows 

Toner Low

, 

you can still print; however, the 
machine is telling you that the 
toner cartridge is near the end of 
its life and the toner will soon run 
out.

Order a new toner cartridge now.

Error Message

Cause

Action