Brother Internet Print: Configuring the Brother Print/Fax Server; Print Server Configuration Checklist; Brother Internet Print: Configuring the Brother - Page 49

5 - 3 CONFIGURING INTERNET PRINTING FOR WINDOWS

®

■

At the remote site, an E-mail server receives the E-mail message. 
The remote Print/Fax server, which has its own E-mail address, 
uses the POP3 protocol (Post Office Protocol 3) to download the 
E-mail message from the E-mail server. It then decodes the 
attachment and prints it out on the printer.

Brother Internet Print: Configuring the Brother 
Print/Fax Server

The Print/Fax server can be configured using BRAdmin Professional 
utility or by using a web browser. 

Print Server Configuration Checklist

1

Configure the POP3 server on the E-mail server at the remote 
site with a mail account (Mailbox name) and password for the 
Brother Print/Fax server (generally, the mail account name will 
be the first part of the Email address; for example, if you assign 
the E-mail address emailprinter@xyz.com, then the mail 
account name would be emailprinter). 

2

Make sure that the Print/Fax server is installed and running with 
TCP/IP enabled and has a valid IP address assigned to it.

Because access to the E-mail server on most networks is usually 
restricted, you may need to have your network administrator check 
the configuration and add the mail account. 

If an E-mail is received that has not been configured to use 
the BIP virtual port driver, the printer will print the E-mail out 
as a text document.

Before configuring the print server to receive BIP jobs, be 
sure that the E-mail server at the remote site (the receiving 
end) is configured to handle the TCP/IP POP3, and SMTP 
protocols (SMTP is only required if the notification feature is 
enabled).