2.3. Using HP-GL/2 Color Mode; Black reference for value #1, #2, #3 ; Using HP-GL/2 Color Mode - Page 147

CHAPTER 3 PCL5C - 9 

♣

Black reference for value #1, #2, #3 

♣

This mode specifies the black value (the highest level of density). 

♣

Each value indicates a color as follows; 

#1: red 
#2: green 
#3: blue 

Range: -32767 ~ 32767 



When the encoding mode is 2 or 3, this setting is valid. 

2.3.

Using HP-GL/2 Color Mode 

Two methods are provided to set the color mode in the HP-GL/2 mode.    Set the color mode by the PCL 
command, then transfer to the HP-GL/2 mode.    Execute the 

NP

 command. 

For the details on how to use the color selections in the HP-GL/2 mode, refer to Section 6 'HP-GL/2'.